This section provides detailed information on how to remove or install the components from your computer.
USB dongle-bay cover
Removing USB dongle-bay cover
CAUTION:
Place the computer on a flat, soft and clean surface to avoid scratches on the
display.
1
Follow the procedure in
Before working inside your computer
2
Place the computer face down.
3
Press and pull the USB dongle-bay cover out of your computer.
Installing dongle-bay cover
1
Align the tabs on the USB dongle-bay cover into the slots on the back cover and snap the USB dongle-bay cover into place.
2
Follow the procedure in
After working inside your
Removing and installing components
computer.
Removing and installing components
2
13