Dell Precision 5720 Owner's Manual page 89

Table 7. General
Option
System Information
Boot Sequence
Advanced Boot Options
Date/Time
Table 8. System Configuration
Option
Integrated NIC
SATA Operation
Drives
Smart Reporting
USB Configuration
Description
Displays the following information:
• System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag, Ownership
Date, Manufacture Date, and the Express Service Code.
• Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory
Channel Mode, Memory Technology, DIMM 1 Size, DIMM 2 Size, DIMM 3 Size, and DIMM 4
Size.
• PCI Information: Displays SLOT1 and SLOT2_M.2.
• Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock
Speed, Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3
Cache, HT Capable, and 64-Bit Technology.
• Device Information: Displays SATA-0, SATA-1, SATA-4, M.2 PCIe SSD-0, LOM MAC Address,
Video Controller, dGPU video controller, Video BIOS version, Video memory, panel type,
Native resolution, Wi-Fi Device, Bluetooth Device, and Audio Controller. .
Allows you to specify the order in which the computer attempts to find an operating system from the
devices specified in this list.
• Legacy
• UEFI (default)
Allows you to select the Enable Legacy Option ROMs option, when in UEFI boot mode.
Allows you to select the Enable Attempt Legacy Boot option.
Allows you to set the date and time settings. Changes to the system date and time take effect
immediately.
Description
Allows you to control the on-board LAN controller. The option 'Enable UEFI Network Stack' is not
selected by default. The options are:
• Disabled
• Enabled
• Enabled w/PXE (default)
NOTE: Depending on the computer and its installed devices, the items listed in this section
may or may not appear.
Allows you to configure the operating mode of the integrated hard drive controller.
• Disabled = The SATA controllers are hidden
• RAID ON = SATA is configured to support RAID mode (selected by default)
• AHCI= SATA is configured for AHCI mode
Allows you to enable or disable the various drives on-board:
• SATA-0
• SATA-1
• SATA-4
• M.2 PCIE SSD-0
This field controls whether hard drive errors for integrated drives are reported during system startup.
The Enable Smart Reporting option is disabled by default.
Allows you to enable or disable the integrated USB controller for:
System setup 89