Removing and installing components
This section provides detailed information on how to remove or install the components from your computer.
Topics:
•
Recommended tools
•
Removing the cover
•
Installing the cover
•
Removing the front bezel
•
Installing the front bezel
•
Removing the fan duct
•
Installing the fan duct
•
Removing the memory module
•
Installing the memory module
•
Removing the intrusion switch
•
Installing the intrusion switch
•
Removing the expansion card
•
Installing the expansion card
•
Removing the hard drive assembly
•
Removing the hard drive from the hard drive bracket
•
Installing the hard drive into the hard drive bracket
•
Installing the hard drive assembly
•
Removing the optical drive
•
Installing the optical drive
•
Removing the system fan
•
Installing the system fan
•
Removing the heat sink assembly
•
Installing the heat sink assembly
•
Removing the processor
•
Installing the processor
•
Removing the VGA daughter board
•
Installing the VGA daughter board
•
Removing the power supply unit (PSU)
•
Installing the power supply unit (PSU)
•
Removing the power switch
•
Installing the power switch
•
Removing the SD card reader
•
Installing the SD card reader
•
Installing the optional SSD card
•
Removing the optional SSD card
•
Removing the system board
•
Installing the system board
•
System board layout
Recommended tools
The procedures in this document require the following tools:
● Small flat blade screwdriver
● Phillips screwdriver
● Small plastic scribe
6
Removing and installing components
2
Need help?
Do you have a question about the OptiPlex 7040-Small Form Factor and is the answer not in the manual?
Questions and answers