Optional Tray & Handle(S) - Ikelite 6970.03 Instruction Manual

2. If using a Zoom Gear, place it over the lens with the teeth side
facing away from the housing.
3. Rotate all three Thumb Screws counterclockwise so that
approximately 4 threads are visible. This will allow the port to slide
over the Port Base.
4. Slide the lens port onto the Port Base and press evenly down
toward the housing until it stops. There should be a very thin, even
gap between the bottom of the port and the housing front.
5. Rotate all three Thumb Screws clockwise until they are snug
against the port. DO NOT overtighten.
OPTIONAL Tray & Handle(s)
Easily add an optional Tray and Single or Dual Handle to allow
attachment of strobe arms, strobes and additional accessories. Go to
ikelite.com for additional information.
14
MENU
Optional Tray and Handle
INFO
Av
13