Setting Up Your Housing; Opening The Housing - Ikelite 6970.03 Instruction Manual

4. Set Mode Dial to "M" Manual Mode.
5. Set shutter speed to 1/125th second and aperture to F8. Set
aperture to F22 for macro (close-up) photography.
6. Set Red-Eye Reduction to "Disable."
7. In Flash Control, set Flash Firing to "Enable."
8. Set LCD Auto Off to "Disable."
9. Set Touch Control to "Disable."
NOTE: These initial camera settings may change based on your
shooting conditions. All other camera functions not mentioned
should be set to the user's preference.

Setting Up Your Housing

Opening the Housing

1. Push the lid snap lock forward and start to lift the curved end away
from the housing.
2. Lid snaps are designed to provide enough force to compress the
o-ring for a proper seal. Keep firm pressure against the lid snap
while lifting it away.
3. Repeat with remaining lid snap.
4. Remove the housing back.
8
Lid Snap Lock