Conversion Circuitry - Ikelite 6970.03 Instruction Manual

4. Attach the other end of the sync cord to the bulkhead on your
strobe.
Waterproof
Bulkhead Cap
Retaining
Ring
Bulkhead
side view
5. If using an Ikelite strobe, set the strobe to TTL. If using a non-
Ikelite strobe, set the strobe to manual flash and select a manual
power setting.
6. Turn on the strobe(s).
7. Turn on the camera.
8. Take a test photo to ensure that your strobe(s) are functioning
properly.

Conversion Circuitry

This small compact digital SLR housing has Ikelite designed and
patented Conversion Circuitry built right in. The Conversion Circuitry
provides real Canon eTTL flash exposure when used with Ikelite DS
series strobes. Once a DS series strobe is attached to the camera
housing, the conversion circuitry is automatically powered after the
strobe is turned on. Once attached, turn the strobe on first before
turning on the camera. The circuitry cannot be powered up or used by
non-Ikelite strobes.
16
Retaining
Ring
O-ring
Bulkhead
top view