Inserting The Camera - Ikelite 6970.03 Instruction Manual

Inserting the Camera

1. Remove any lanyard or neck strap which may be attached to the
camera.
2. Remove the camera Mounting Tray from the housing.
3. Line the mounting screw up with the camera's tripod socket. Use a
coin or flat head screwdriver to tighten the mounting plate to the
camera.
Mounting screw
1/4-20
Tripod
Mounting
Hole
Mounting
Bolt
Mounting
Tray
4. Pull out on the housing control knobs to move them out of the way.
Camera tripod
socket
9