CyberData 011405 Operation Manual page 103

A.1.1 Mounting the Enclosure
To mount the enclosure:
1. Prepare holes for the screws.
2. Plug in the power adapter and use the Power (PWR) LED to verify that the power is on.
3. Plug the ethernet cable into the device. The Link/Activity (Link/Act.) LED verifies the network
4. For wall mounting, use the three #8 x 1-1/4-inch Truss Head Phillip screws to secure the
Operations Guide
connection.
speaker. See Figure A-1.
Figure A-1. Mounting the Enclosure
931236E
Mount the Amplifier
151147
#8x1.25" Truss Head Phillips
Sheet Metal Screw (3x)
531032
Plastic Ribbed Anchor (3x)
CyberData Corporation
96