Omron R88D-GT series User Manual page 396

6-4 Setting the Mode
 Automatic Servomotor Recognition
 Analog Input Value Display (Front Panel Operation)
Input signal
6
Note: The displayed value will not be accurate if the voltage exceeds ±10 V.
6-15
Automatic recognition enabled (Always this indication is displayed.)
Input voltage (V)
Press the Increment or Decrement key to
select the signal to monitor.
The REF analog input value (V)
after offset adjustment is displayed.
The PCL analog input value (V) is displayed.
The NCL analog input value (V) is displayed.