Test Run - Grizzly G1015 Owner's Manual

16.
17.
Figure 16
Figure 16.
18.
Figure 17
Note: There are several holes provided for
attaching the tool rest assembly so that you
can choose the best position for your opera-
tion.
Figure 17.
19.
Step 16
Troubleshooting
To test run the machine:
1.
Step 16
2.
3.
4.
5.
6.
Note: When the sanding belt is installed and
properly tensioned, there should be no more
than ⁄ " between the tool rest and the belt to
1
8
ensure the workpiece will not become trapped
between the rest and belt during operation.

Test Run

Page 26
ON
OFF
Figure 17