Grizzly G1015 Owner's Manual page 19

10.
Figure 12
Note: The pivot arm and bushing are designed
so that the set screws tighten into the grooved
surface of the bushing. This keeps the pivot
arm from sliding off the bushing when using
the tilt feature.
Figure 12.
11.
Figure 13
Note: It may be necessary to use a dead-
blow hammer to seat the drive wheel onto
the arbor. Take great care not to damage the
drive wheel or the threads of the arbor.
Figure 13.
12.
Figure 14
Figure 14.
13.
Figure 14
14.
Figure 15
Figure 15.
15.
Figure 15