Remove Wiring Cover; Slide Magnet Onto Bracket; Align Magnet To Armature; Fully Attach Bracket - Schlage M420 Installation Instructions Manual

5b

Remove Wiring Cover

5d

Align Magnet to Armature

• Close door.
• Press magnet to fully engage with armature.
• Mark bracket location.
Mark here
Press magnet to armature
6
5c

Slide Magnet onto Bracket

E
I D
T S
O U
5e

Fully Attach Bracket

• Remove magnet from bracket.
• Check bracket alignment with marks.
• Fully tighten two screws in slotted holes.
• Drill four (4) remaining holes.
• Fully tighten all screws.
Check
alignment
Fully tighten
all screws
Drill four (4) holes
Use 10-24 tap if
metal reinforced
Actual Size
Reinforced
Metal
Sheet
Metal