Reorient Magnet (If Necessary); Place Template And Mark Holes - Schlage M420 Installation Instructions Manual

1b

Reorient Magnet (if necessary)

• Remove screws, wiring cover and end blocks.
Magnet
End Block
• Rotate magnet, end blocks and wiring cover as shown, then reassemble.
End Block
(with screw hole)
1c

Place Template and Mark Holes

• Place template on top corner, opposite of hinges.
• Mark holes and prepare them per template.
LHR
Wiring Cover
End Block
(with screw hole)
Magnet
RHR
3