When User Range Setting Is Used And Initial Setting Was Made With Gx Configurator-Ad; (Other System Is Available) - Mitsubishi Q64AD-GH User Manual

7 ONLINE MODULE CHANGE
MELSEC-Q

7.3.3 When user range setting is used and initial setting was made with GX Configurator-AD

(other system is available)

(1) Conversion disable
(a) Set the A/D conversion enable/disable setting (buffer memory address 0:
Un\G0) for all channel conversion disable and turn operating condition
setting request (Y9) from OFF to ON to stop conversion.
After confirming that conversion has stopped with the A/D conversion
completion flag (buffer memory address 10: Un\G10), turn off Operation
Condition Setting Request (Y9).
(The screen shows the setting example of the Q64AD-GH.)
7 - 14 7 - 14