Installing Of Communication Driver - Mitsubishi GOT1000 User Manual

11.1.4 Installing of communication driver

GT10 is factory-installed with the driver for MELSEC-FX.
An installation of the communication driver is required when connected to a controller other than a MELSEC-FX.
When installing communication driver onto the GOT, power on the GOT in the OS transmission mode.
(Operating of transmission mode)
Refer to the chapter below for detailed information on the OS installation screen of the GOT.
Chapter 15. OS INSTALLATION
Refer to the chapter below for how to install the communication driver from GT Designer2.
GT Designer 2 Version
Chapter 8. TRANSFERRING DATA
Turn the GOT power
on with the lower right
corner touched.
Basic Operation/Data Transfer Manual
11.1.4 Installing of communication driver
WWW.NNC.IR
11.1 Standard I/F Setting
9
10
11
12
13
14
15
16
11 - 5