Mitsubishi GOT1000 User Manual page 65

(3) Channel no. display BOX
0: Set when the communication interface is not used.
1: Set when connecting to PLC.
(settable only for the interface (Standard I/F-1) for communication with PLC)
9: Set when connecting to PC (GT Designer2).
• Setting is not allowed for 2 to 8, *.
(4) Driver display BOX
The name of the communication driver for which a channel number is assigned is displayed.
"None" is displayed in the driver display box in the following cases :
• The communication driver is not installed. (
• "0" is set in the channel number specification menu box.
[*****] will appear when the communication driver that was installed on the GOT from GT Designer2
and the controller setting that was downloaded on to the GOT from Designer2 do not match.
When setting the channel number to "9", the communication driver "Host (PC)" is automatically
assigned.
When the driver display box is touched, the screen jumps to the detail information screen and the
communication parameter appears.
2 Detail information display operation
Touch [Driver display BOX].
The types of items that are in the communication parameter setting menu depend on the type of
communication driver that is installed on the GOT in use.
Refer to the section below for the setting contents of various drivers.
GT Designer2 Version
Section 3.7 Communication Interface Setting (Communication Settings)
Section 14.2 OS Information)
1 Touch Standard I/F-1 driver display box in
the Standard I/F setting window.
2 The screen jumps to the detailed
information screen and the communication
parameter will appear.
Use the
the items when there are multiple items to
be set.
(The
other items are available.)
3 Touch the
setting screen.
Screen Design Manual
11.1.3 Display contents of standard I/F
WWW.NNC.IR
, buttons to toggle through
, buttons will not work when no
button to close the detail
ESC
11.1 Standard I/F Setting
9
10
11
12
13
14
15
16
11 - 3