Utility Display; Display Operation Of Main Menu - Mitsubishi GOT1000 User Manual

9.2 Utility Display

9.2.1

Display operation of main menu

The following three types of operation can display the main menu.
(The utility function windows appear in the horizontal format, and this format cannot be changed.)
(1) When project data is undownloaded
After the GOT is turned on, a dialog box for notifying of absence of project data is displayed.
After the dialog box is displayed, touch the
GOT power on
(2) When touching menu call key
If you touch the menu call key while user-created screen is displayed, the main menu is displayed.
The menu call key can be set by GT Designer2.
(At factory shipment, it is set in the top left corner of the GOT screen.)
Menu call key
(3) When touching special function switch
If you touch the special function switch (utility) while user-created screen is displayed, the main
menu is displayed.
The special function switch (utility) can be set as a touch switch that is displayed on a user-created
screen by GT Designer2.
(When the utilities menu is assigned to the special function switch, the main menu appears when
the switch is touched.)
Special function switch (Utility)
For the details of the special function switch, refer to the following.
GT Designer2 Version
Section 6.2 Touch Switch
button to display the main menu.
OK
Touch the OK button
Screen Design Manual
9.2.1 Display operation of main menu
WWW.NNC.IR
9.2 Utility Display 9 - 2
9
10
11
12
13
14
15
16