6.2 Panel Cutting Dimensions
Cut holes in the following dimensions on the panel.
A space of at least 13 mm (0.51") at the top and bottom is required to allow for the attachment of mounting
fixtures.
Horizontal format
Vertical format
(In the case of vertical format, the height and the width of the panel cut dimensions are reversed.)
13(0.51")
or more
6 - 3
6.2 Panel Cutting Dimensions
+1
+0.03
105
(4.13"
)
−0
−0
+1
+0.03
66
(2.59"
)
−0
−0
WWW.NNC.IR
Unit: mm(inch)
13(0.51")
or more
Unit: mm(inch)