Requirements; Identifying Phone Model; Phone Firmware; Dhcp Server - Polycom IP 5000 User Manual

Hide thumbs Also See for IP 5000:

Table of Contents

This User Guide is written as general guide on how to set up the Polycom phone model: IP 5000

PBXware 3.1.

Requirements

To start and successfully complete registration of your Polycom phone you need to know which

phone model you will setup.

From the back of each Polycom phone there are exact model information that you should check.

Although different phone models can have exactly the same requirements and installation

procedure, phone models can also have significantly different requirements and installation

procedure, so that ignorance of your own model may result in the inability to successfully set up

your phone.

Make sure that your phone is loaded with firmware version 3.1.x.

Press Menu button.

Go to Status, press select button.

Go to Platform and press select button.

Go to Application and press select button.

Go to Main and press select button then the firmware is displayed, example: Version

3.3.40085.

Fully configured and operational DHCP server.

In order to find out the PBXware version, please login to PBXware and navigate to Settings:

Table of Contents

Do you have a question about the IP 5000 and is the answer not in the manual?