Polycom IP 5000 User Manual page 5

Make sure Polycom UAD is enabled. To check the UAD status click on the edit icon
corresponding to your Polycom phone.
Make sure Status is set to Active, Auto provisioning is set to No, and DHCP is set to Yes.
Click on the Save button to save changes.
Creating extension
Creating Extension
Add extension
Navigate to Extensions. Click on Add Extension.
The standard options window will be shown below.
Select Polycom phone model from the UAD select box.
Select Location: Local or Remote.
Local is for all extensions registered on the LAN and Remote is for all extensions
registered from remote networks, WAN, Internet etc.
Click on the Next step button.
Extension values
Enter values into the required field text boxes.
REQUIRED FIELDS:
Name
Enter a name for the extension being created. Example: John Smith.
E-mail
Enter the e-mail address associated with this extension. This e-mail address will receive all
system notification messages. Example: john.smith@bicomsystems.com
Click on the Save button.
Registering Phone
This chapter describes how to register Polycom phone using Hostname or IP Address, or DNS
SRV.
The following topics are covered: