Auto Provisioning; Uad Settings - Polycom IP 5000 User Manual

Press Select button to enter Admin Settings.
Go to Line Configuration and press Select button.
Go to Line 1 and press Select button.
Go to Server 1 and press Select button.
Press Edit button to edit Address line and enter the Hostname.
- Example for the Hostname: abc.bicomsystems.com
Make sure you replace Hostname from this example with your PBXware Hostname.
Make sure DNS server is configured to automatically route registration request to a PBXware
which is actually under another domain name, example: abc.bicomsystems.com.
Press the Back button.
Go to Authentication and press Select button.
Press Edit button to edit User ID enter PBXware extension number. Example: 1003. Then
press the Ok button.
Go to Password and press Edit button, enter secret of the extension as received in the e-mail
associated with this extension. Example: _%Z4M3*Ts9y7. Then press the Ok button.
Press Back button twice, then press Select button to Save Configuration.
Auto provisioning process will start during phone reboot process, phone will pickup
appropriate configuration file from PBXware. If everything is done as above described, you
should have successfully registered your phone to PBXware. Dial *123 to verify registration.

Auto provisioning

This chapter describes how to set UAD settings, create PBXware extension and register the
phone using DHCP or Static IP address.
The following topics are covered:

UAD settings

Creating extension
Registering phone
UAD settings
UAD settings