Requirements; Identifying Phone Model; Phone Firmware - Polycom VVX150 Configuration Manual

This Configuration Guide is written as general guide on how to configure the Polycom VVX150
OBi Edition phone model to work with PBXware 5.3.5.

Requirements

Identifying phone model

To start and successfully complete registration of your Polycom VVX OBi Edition phone you
need to know which phone model you will setup.
From the back of each Polycom VVX OBi Edition phone there are exact model information that
you should check. Although different phone models can have exactly the same requirements and
installation procedure, phone models can also have significantly different requirements and
installation procedure, so that ignorance of your own model may result in the inability to
successfully set up your phone.

Phone firmware

Make sure that your phone is loaded with appropriate firmware version, 6.3.0.0.
To find out the firmware version of your Polycom VVX OBi Edition phone model open a new
browser window and enter your phone IP address in order to access the phone web
administration interface login screen. Example: http://192.168.1.22.
Login to phone web administration interface with your username and password. Please note,
factory default login details are username: admin and password: admin.