Part I Introduction; Part Ii Requirements - Polycom User Manual

1
Introduction
This User Guide is written as general guide on how to set up the Polycom phone models:
IP 301, IP 320, IP 321, IP 330, IP 331, IP 335, IP 450, IP 501, IP 550, IP 560, IP 601,
2
Requirements
1. Identify Polycom Phone Model
To start and successfully complete registration of your Polycom phone you need to
know which phone model you will setup.
From the back of each Polycom phone there are exact model information that you
should check. Although different phone models can have exactly the same
requirements and installation procedure, phone models can also have significantly
different requirements and installation procedure, so that ignorance of your own
model may result in the inability to successfully set up your phone.
2. Phone firmware
Make sure that your phone is loaded with appropriate firmware version.
model
IP 301
IP 320
IP 321
© 2003 - 2012 Bicom Systems
Polycom Phones User Guide
IP 650 and IP 670 to work with PBXware 3.1.
firmware
3.1.x
3.3.x
3.3.x
Introduction 1