Polycom IP 5000 User Manual page 10

system notification messages. Example: john.smith@bicomsystems.com
Auto Provisioning
Set to Yes.
MAC Address
Enter Polycom phone MAC address. Example: 0002FDFF1536. MAC address can be
found at the back of the phone.
Additional Config
You can set additional settings to be sent to this phones configuration:
For BLF/Presence
<feature feature.1.name="presence" feature.1.enabled="1">
For a custom Digit Map:
<digitmap dialplan.digitmap="[2-9]11|0T|011xxx.T|[0-1][2-9]xxxxxxxxx|[2-9]xxxxxxxxx|[2-9]
xxxT" dialplan.digitmap.timeOut="3"/>
Click on the Save button.
Registering Phone
This chapter describes how to register Polycom phone using DHCP, TFTP, HTTP & HTTPS or
DNS SRV.
The following topics are covered:
- DHCP
- TFTP or HTTP & HTTPS
- DNS SRV
DHCP
Configure DHCP
Make sure your DHCP router is configured to use option 66 to automatically instruct phones
with the URL for auto provisioning. For more information refer to your router documentation
or contact your network administrator.
Phone first boot or user initiated reboot
Auto provisioning process will start during phone first boot or after reboot process has been
initiated by user. DHCP server will instruct the phone where from to pickup appropriate