Accessories - Seco Udoo X86 User Manual

5.1 Accessories

5.1.1 M.2 Dual network modules
When this accessory is plugged into M.2 slot CN20, the UDOO x86 board will offer three different Gigabit Ethernet ports.
X86
UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.
As a separated accessory, it is available an M.2 Dual Network Set, so composed:

An M.2 2260 module, which embeds a PCI-e packet switch. It virtually separates the PCI-e x2 Port, coming from the
UDOO x86 board (through M.2 Slot CN20), into two separated PCI-e ports, each one used specifically to manage a Gigabit
Ethernet controller. The Gigabit Ethernet interfaces, coming from the controllers, are then carried to a connector type HR
A1014WVA-S-2x15P or equivalent (2 x 15p, male, straight, P1, low profile, polarised).

A daughter-board, which mounts a connector identical to that available on the main M.2 module and two RJ-45 Gigabit
Ethernet connectors with integrated transformer.

Twisted pairs connecting cable, to connect the M.2 module with the daughter-board.
60