Table of Contents
Advertisement
2.2 Technical specifications
SoC
®
®
Intel
Pentium
N3710, Quad Core @1.6GHz (Turbo Boost 2.56GHz), 2MB
Cache, 6W TDP
®
®
Intel
Celeron
N3160, Quad Core @1.6GHz (Turbo Boost 2.24GHz), 2MB
Cache, 6W TDP
®
Intel
Atom x5-E8000, Quad Core @1.04GHz, 2MB Cache, 5W TDP
Memory
Up to 8GB Dual Channel DDR3L Memory soldered on-board*
Graphics
®
Integrated Intel
HD Graphics controller
Three independent display support
HW decoding of HEVC(H.265), H.264, MPEG2, MVC, VC-1, VP8, WMV9,
JPEG/MJPEG formats
HW encoding of H.264, MVC and JPEG/MPEG formats
Video Interfaces
HDMI connector
2 x miniDP++ connectors
Video Resolution
Up to 3840 x 2160 24bpp @ 30Hz, 2560 x 1600 24bpp @60Hz
Mass Storage
Optional 32GB eMMC drive onboard
SATA 7p M connector
M.2 Key B SSD slot (Type 2242 or 2260 modules accepted)
microSD Card slot
Networking
Realtek RTL811G Gigabit Ethernet controller
Gigabit Ethernet LAN interface
M.2 Key E Slot for optional Wireless modules
Embedded Bluetooth Low Energy module + antenna
* Please notice that total amount of 8GB would be usable only with 64-bit OS. Total
amount of memory available with a 32-bit OS depends on the OS itself (less than
4GB, however).
USB
3 x USB 3.0 Host ports on Type-A sockets
1 x USB 2.0 Host port on M.2 Key E slot
PCI-Express
1 x PCI-e x2 port on M.2 Key B SSD Slot
1 x PCI-e x1 port on M.2 Key E slot
Audio
HD Audio Codec Realtek ALC283
Combo TRSS connector with Mic In and Line out support
S/PDIF signal
2 x Speaker internal headers
Serial ports
2 x UART with Flow Control ports
Other Interfaces
Up to 20 extended GPIOs, multiplexed with other interfaces
LPC, 2x I2C, T/S signals, GPIOs on expansion connector
I2C UDOO bricks connector
SPI Connector
Switch/LED Front Panel Header
CIR (Consumer InfraRed) Sensor
Arduino 101 compatible shield
Integrated 6-axis combo sensor with accelerometer and gyroscope
Power supply: +12V
± 5%
DC
RTC Coin cell Battery
Operating temperature:
0°C ÷ +60°C** (Commercial temperature)
Dimensions: 120 x 85 mm (4.72" x 3.35").
Supported Operating Systems:
®
Microsoft
Windows 10, 8.1, 7
Any Linux distribution for x86 64-bit platform
Android
** Temperatures indicated are the maximum temperature that the
heatspreader / heatsink can reach in any of its parts. This means that it is
'
customer
s responsibility to use any passive cooling solution along with an
application-dependent cooling system, capable to ensure that the
heatspreader / heatsink temperature remains in the range above indicated.
Advertisement
Table of Contents
