Seco Udoo X86 User Manual
  1. Manuals
  2. Brands
  3. Seco Manuals
  4. Desktop
  5. Udoo X86
  6. User manual

Seco Udoo X86 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
UDOO X86
Next-gen Open hardware SBC with the N-series
®
®
®
Intel
Pentium
/ Celeron
and x5-Series Atom
SoCs

Advertisement

Table of Contents
loading

Summary of Contents for Seco Udoo X86

  • Page 1 UDOO X86 Next-gen Open hardware SBC with the N-series ® ® ® Intel Pentium / Celeron and x5-Series Atom SoCs...
  • Page 2 The above mentioned documents are copyright © 2008 Insyde Software Corp. All rights reserved. For further information on this module or other SECO products, but also to get the required assistance for any and possible issues, please contact us using the dedicated web form available at http://www.seco.com (registration required).

  • Page 3: Table Of Contents

    M.2 Connectivity Slot: Socket 1 Key E Type 2230 ......................................32 3.3.11 FAN connector ................................................33 UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.
  • Page 4 Exit menu ..............................................58 Chapter 5. APPENDICES.................................... 59 Accessories ..............................................60 5.1.1 M.2 Dual network modules ............................................60 UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.
  • Page 5  Safety  Electrostatic discharges  RoHS compliance  Terminology and definitions  Reference specifications UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 6: Warranty

    All changes or modifications to the equipment not explicitly approved by SECO S.r.l. could impair the equipment s functionalities and could void the warranty UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 7: Information And Assistance

    A RMA Number will be sent within 1 working day (only for on-line RMA requests). UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 8: Safety

    Check carefully that all cables are correctly connected and that they are not damaged. 1.5 Electrostatic discharges The UDOO x86 board, like any other electronic product, is an electrostatic sensitive device: high voltages caused by static electricity could damage some or all the devices and/or components on-board.

  • Page 9: Terminology And Definitions

    Graphics Processing Units (GPU) OpenGL Open Graphics Library, an Open Source API dedicated to 2D and 3D graphics UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.
  • Page 10 Host Controller Interface, Host controller for USB 3.0 ports, which can also manage USB 2.0 and USB1.1 ports UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 11: Reference Specifications

    USB 3.0 http://www.usb.org/developers/docs/usb_30_spec_070113.zip Intel ® N-Series Pentium ® / Celeron ® http://ark.intel.com/products/codename/66094/Braswell#@Embedded x5-Series Atom family UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 12: Chapter 1. Introduction

    Chapter 2.  Introduction  Technical specifications  Electrical specifications  Mechanical specifications  Block diagram UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 13: Introduction

    Curie microcontroller (the same used, indeed, in Arduino 101 boards). All the SoCs mounted on UDOO x86 are Quad-Core, ranging from 2.00GHz up to 2.56 GHz, with 64-bit instruction set and very low TDP. This single chip solution includes the memory controller, which gives support for up to 8GB of DDR3L memory directly soldered on-board.

  • Page 14: Technical Specifications

    2.2 Technical specifications ® ® Intel Pentium N3710, Quad Core @1.6GHz (Turbo Boost 2.56GHz), 2MB 3 x USB 3.0 Host ports on Type-A sockets Cache, 6W TDP 1 x USB 2.0 Host port on M.2 Key E slot ® ® Intel Celeron N3160, Quad Core @1.6GHz (Turbo Boost 2.24GHz), 2MB...

  • Page 15: Electrical Specifications

    Batteries supplied with UDOO x86 are compliant to requirements of European Directive 2006/66/EC regarding batteries and accumulators. When putting out of order UDOO x86, remove the batteries from the board in order to collect and dispose them according to the requirement of the same European Directive above...

  • Page 16: Power Consumption

    For this reasons, it is recommended to use PSU with a minimum power of 36W for basic functionalities UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 17: Power Rails Naming Convention

    Other suffixes are used for application specific power rails, which are derived from same voltage value of voltage switched rails, if it is not differently stated (for example, +5V is derived from +5V_S, and so on). HDMI UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 18: Mechanical Specifications

    The printed circuit of the board is made of ten layers, some of them are ground planes, for disturbance rejection. UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 19: Block Diagram

    Coin Cell Cabled Battery connectors Soldered down Soldered down DDR3L System DDR3L System Memory Memory UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 20: Chapter 3. Connectors

    Chapter 3.  Introduction  Connectors overview  Connectors description UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 21: Introduction

    3.1 Introduction On UDOO x86 board, there are several connectors located on the upper plane. Standard connectors are placed on the same side of PCB, so that it is possible to place them on a panel of an eventual enclosure.

  • Page 22: Connectors Overview

    Arduino interface + expansion connector #2 CN30 SATA Power Connector CN14 Arduino interface + expansion connector #3 IR Receiver UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 23: Connectors Description

    GBE_MDI3+/GBE_MDI3-: Ethernet Controller Media Dependent Interface (MDI) I/O differential pair #3. It is the fourth differential pair in Gigabit Ethernet mode; it is not used in 10/100Mbps modes. UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 24: Usb Ports

    The Intel Braswell family of SoCs used on UDOO x86 board can manage up to four USB SuperSpeed (i.e., USB 3.0 compliant) ports and five High Speed (i.e. USB 2.0 compliant) ports. There is only one dedicated High Speed port, the other four ports are shared with the SuperSpeed ports, i.e. they can be used either by USB 2.0 or USB 3.0.
  • Page 25 “Win7 Keyboard/Mouse Support”, see paragraph 4.3.9) before performing Windows  ® Configuration” submenu 7 and chipset’s driver installation UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 26: Hdmi Connector

    Always use HDMI-certified cables for the connection between the board and the HDMI display; a category 2 (High-Speed) cable is recommended for higher resolutions, category 1 cables can be used for 720p resolution. UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 27: Minidp++ Connectors

    HDMI compatibility when a HDMI adapter is connected to the DP connector. DP2_LANE1+ DP2_LANE3+ DP2_LANE1- DP2_LANE3- DP2_LANE2+ HDMI2_CTRL_CLK / DP2_AUX+ DP2_LANE2- HDMI2_CTRL_DAT / DP2_AUX- +3.3V_S UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 28: Audio Interfaces

    Speaker Right Channel - Left Speaker Connector- CN11 Speaker Left Channel - Speaker Left Channel + UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 29: Buttons / Led Header

    FP PWR_N/SLP_P: Power/Sleep messaging LED terminal 2 with 510Ω pull-up resistor to +5V_A voltage. Connect it to the other extremity of the dual-color power LED above mentioned. UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 30: Μsd Slot

    μSD slot 3.3.7 The SoCs used on UDOO x86 module offer a SD 3.0 compliant interface, that can be used to implement another mass storages media other than the optional internal eMMC and the two SATA interfaces. This SD interface is carried to a standard μSD card slot (CN17), soldered on top side of the module, push-push type.

  • Page 31: M.2 Sata/Pci-E Slot: Socket 2 Key B Type 3042/2260

    PCIe0_Clock+ PCIe_REQ0#: PCI Express Clock Request Input, active low signal. This signal shall be driven UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 32: M.2 Connectivity Slot: Socket 1 Key E Type 2230

    PCIe3_Tx+ the Connectivity module plugged in the slot when it requires waking up the system. UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 33: Fan Connector

    FAN_TACHO_IN: tachometric input from the FAN to the embedded microcontroller, +3.3V_S electrical level signal with 10kΩ pull-up resistor. UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 34: Udoo Bricks Connector

    This will allow the plugging of Arduino 101-compatible sketches on these connectors, while leaving the further expansion interfaces free for use. UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.
  • Page 35 IO6/PWM2 UART2_TXD TS_RST# IO5/PWM1 UART2_CTS# I2C0_SDA UART2_RTS# I2C0_SCL IO3/PWM0 UART1_RXD UART1_TXD IO1/TXD UART1_CTS# IO0/RXD UART1_RTS# UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.
  • Page 36 UART2_RTS#: UART Interface, Handshake signal, Request to Send (output) line, 1.8V_A electrical level. It is managed by Intel Braswell SoCs’ High Speed UART UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 37: Ir Receiver

    3.3.15 IR Receiver The UDOO x86 board embeds an IR receiver, which allows using a remote control when the board is placed in an enclosure (like, i.e., on Set Top Boxes). The Infrared Receiver is SMD Type, p/n TSOP75238TR, and works with 38kHz carrier frequency.
  • Page 38  Advanced menu  Security menu  Power menu  Boot menu  Exit menu UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 39: Chapter 4. Bios Setup

    <Enter> key allows to display or change the setup option listed for a particular setup item. The <Enter> key can also allow display the setup sub- screens. UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 40: Main Setup Menu

    Note: The time is in 24-hour format. For example, 5:30 A.M. appears as 05:30:00, and 5:30 P.M. as 17:30:00. The system date is in the format mm/dd/yyyy. UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 41: Advanced Menu

    Enable or disable the measured boot, which provide to antimalware software a trusted log of all boot Measured boot Disabled / Enabled components that started before the antimalware software itself. UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 42: Video Configuration Submenu

    Enable or disable the Power Meter lock Functionality WOPCMSZ 1MB / 2MB / 4MB / 8MB Select a size for WOPCM UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 43: Chipset Configuration Submenu

    Disabled / Enabled Mute HDA Amplifier Disabled / Enabled Force the HDA amplifier to mute, when enabled. UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.
  • Page 44 Enable or disable the LPC support on connector CN13 (pins 2 / 4 / 6 / 8 / 10 / 12 / 14). When disabled, LPC Support Enabled / Disabled the LPC dedicated pins will be available as GPIOs UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.
  • Page 45 Disabled / L1.1 & L1.2 / L1.1 / L1 Substates PCI Express L1 Substates settings. L1.2 UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 46: Acpi Table/Features Submenu

    Serial ATA Port 0 / 1 Shows information related to eventual devices connected to SATA ports 0 or 1 UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 47: Console Redirection Submenu

    When this feature is enabled, the SPCR table will be add-into ACPI tables. PCI_HS_UART 0:30:3 See submenus PCI_HS_UART 0:30:4 UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.
  • Page 48 Set HS_UART #x stop bits None Flow Control RTS/CTS Set HS_UART #x flow control type XON/XOFF UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 49: Post Hot Key Submenu

    When enabled, this item will force the Legacy Free mode (it will disable the KBC). UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 50: Security Menu

    Selecting this option will clear the User password without having to type the current password. A supervisor Clear User Password can use this to clear a user password without knowing it. UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 51: Power Menu

    Enabled / Disabled Power Management Enable wake-up event (e.g. to enable Wake on LAN feature). UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.
  • Page 52 5 ÷ 44 Set the number of seconds after which the board will wake up automatically UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 53: Advanced Cpu Control Submenu

    C1 / C6 / C7 Allows selection of the maximum C-State that must be supported by the OS. UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 54: Ec Watchdog Configuration Submenu

    50 / 75 / 100 threshold. Above AC0, the fan will run at full speed. UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 55: Boot Menu

    First / Last / Auto Specifies the position in Boot Order for Shell, Network and Removable Disks UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.
  • Page 56 This submenu is available only when “Boot Type” is not set to “UEFI Boot type”. Legacy See Submenu Allows setting of Legacy Boot Order UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 57: Legacy Submenu

    Use the + and - Keys to change the boot order priority UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 58: Exit Menu

    Save Custom Default values for all the setup items. Discard Changes Discard Changes but doesn’t exit from setup utility. UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.
  • Page 59 Chapter 5.  Accessories UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

  • Page 60: Accessories

    When this accessory is plugged into M.2 slot CN20, the UDOO x86 board will offer three different Gigabit Ethernet ports. UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.
  • Page 61 SECO Srl - Via Calamandrei 91 52100 Arezzo - ITALY Ph: +39 0575 26979 - Fax: +39 0575 350210 www.udoo.org UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.

Table of Contents