Seco Udoo X86 User Manual page 52

Disabled
By Every Day
Wake on RTC from S5 By Day of Month
By Sleep Time
By OS Utility
[hh:mm:ss]
Wake from S5 time
Day of month 1 ÷ 31
Wake from S5 after (seconds) 5 ÷ 44
X86
UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.
Auto wake up from S5 state, it can be set to happen "By Every Day", "By Day of Month", "By Sleep Time" or
"By OS Utility".
This menu item is available only when " Wake on RTC from S5" is set to "By Every Day" of "By Day of
Month".
Set time of the day when the board must wake up automatically
This menu item is available only when "Auto Wake on S5" is set to "By Day of Month"
This is the help for the day field. Valid range is from 1 to 31. Error checking will be done against
month/day/year combinations that are not supported. Use + / - to Increase / reduce
This menu item is available only when "Auto Wake on S5" is set to "By Sleep Time"
Set the number of seconds after which the board will wake up automatically
52