Video Configuration Submenu - Seco Udoo X86 User Manual

4.3.3 Video configuration submenu

Menu Item Options
HDMI Disabled / Enabled
Mini DisplayPort 0 Disabled / Enabled
Mini DisplayPort 1 Disabled / Enabled
Integrated Graphics Device Disabled / Enabled
Primary Display Auto / IGD / PCIe
RC6(Render Standby) Disabled / Enabled
Disabled / LITE Mode /
PAVC
SERPENT Mode
PR3 Disabled / Enabled
Unsolicited Attack Override Disabled / Enabled
GTT Size 2MB / 4MB / 8MB
Aperture Size 128MB / 256MB / 512MB
32M / 64M / 96M / 128M /
160M / 192M / 224M / 256M /
IGD - DVMT Pre-Allocated
288M / 320M / 352M / 384M /
416M / 448M / 480M / 512M
128M / 256M / MAX
IGD - DVMT Total Gfx Mem
IGD Turbo Auto / Enabled / Disabled
Power Meter Lock Disabled / Enabled
WOPCMSZ 1MB / 2MB / 4MB / 8MB
X86
UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.
Description
Enable / Disable the HDMI video port
Enable / Disable the miniDP video port #1 (CN5)
Enable / Disable the miniDP video port #2 (CN4)
Enabled: enable Integrated Graphics Device (IGD) when selected as the Primary Video Adaptor.
Disabled: always disable IGD. Warning: when the IGD is disabled, there will be no video output at all
(unless there is an external PCIe graphic card selected as Primary Display) and restoring BIOS options to
default values will be possible only by moving blindly in the setup menu.
Select which between IGD or external PCI-e Graphic Controller should be the Primary display
Permits to enable the render standby features, which allows the onboard graphics entering in standby
mode to decrease power consumption
Allows enabling the hardware acceleration of decoding of Protected Audio Video streams.
When not disabled, it is possible to choose between LITE encryption and SERPENT encryption modes.
Enable / Disable PAVP PR3 mode
Enable / Disable PAVP Unsolicited Attack Override
Select the GTT (Graphics Translation Table) Size
Use this item to set the total size of Memory that must be left to the GFX Engine
Select DVMT5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphic Device
Select the size of DVMT (Dynamic Video Memory) 5.0 that the Internal Graphics Device will use
Enable or Disable IGD Turbo mode
Enable or disable the Power Meter lock Functionality
Select a size for WOPCM
42