DSC HS2016 Reference Manual page 62

Press
[#]
[0]
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
Zone Label Options
To access zone label options such as using ASCII characters, changing letter case and clearing the display, press [*] while
in Zone Label programming. The Select Option menu is displayed. Use the [<] [>] keys to access the following options:
Option Description
WORD ENTRY Provides access to the Word Library, a collection of words commonly used when programming labels. See below for
details.
ASCII ENTRY Used to access uncommon characters or as a primary method for programming labels. 255 character entries are
available. Use the [<] [>] keys to scroll through the characters or enter a 3-digit number from 000-255. Press [*] to
select a character. See "ASCII Characters" on page 213 for available ASCII characters.
CHANGE CASE This option toggles the letter between upper case (A, B, C) and lower case (a, b, c).
CLEAR TO END This option clears the display from the cursor to the end of the display.
CLEAR DISPLAY This option clears all characters.
SAVE Saves the new label.
Word Library
The Word Library is a database of words commonly used when programming labels. Individual words can be combined as
needed (e.g., Front + Door). Words that do not fit on the first line are automatically moved to the bottom line.
To program a custom label using the Word Library:
1. Enter Installer Programming: [*][8][Installer Code].
2. Press [*], scroll to Zone Labels and press [*] again.The first zone is displayed. Alternately, press [000][001].
3. Scroll to the zone label to be programmed or key in the zone number (e.g., 001 for zone label 1).
4. Press [*] to open the Select Option menu.
5. Press [*] again to select the Word Entry option.
6. Enter the 3-digit number corresponding to a word (see "Word Library" on page 197) or use the scroll keys [<][>] to view
words in the library.
7. Press [*] to select the word.
8. To add another word, repeat the above procedure from step 4.
9. To add a space, press the right scroll key [>].
10. To clear characters, select Clear to End or Clear Display from the Select Options menu.
11. To save the current label, press [#] to exit label programming.
[051] Zone Tamper Label
This label is displayed when a zone is tampered. The maximum label size is 14 x 1 ASCII characters.
Section 5: Programming
To Select/Display
[ESCAPE]
[SPACE]
[A], [B], [C], [1]
[D], [E], [F], [2]
[G], [H], [I], [3]
[J], [K], [L], [4]
[M], [N], [O], [5]
[P], [Q], [R], [6]
[S], [T], [U], [7]
[V], [W], [X], [8]
[Y], [Z], [9], [0]
- 62 -