Name Plate; Maintenance And Care - Quickie Neon Fixed Front Instructions For Use Manual

7.0 Name Plate

NAMEPLATES
The nameplate is located on either the cross-tube
assembly or the transverse frame tube, as well as on a
label in the owner's manual. The nameplate indicates
the exact model designation and other technical
specifications. Please provide the following pieces of
information whenever you have to order replacement
parts or to file a claim:
SAMPLE
Neon
Neon
Product Name/SKU Number.
Maximum safe slope with anti-tips fitted,
Depends on wheelchair setting, posture and
physical capabilities of the user.
Seat width.
Depth (maximum).
Load Maximum.
CE Mark
User's Guide.
Crash Tested
Date of manufacture.
Serial number.
Due to our policy of continuous improvement in the
design of our wheelchairs, product specifications may
vary slightly from the examples illustrated. All weight/
dimensions and performance data are approximate and
provided solely for guidance.
Sunrise Medical complies with the EU Medical Devices
Directive 93/42/EEC
18 NEON
All wheelchairs must be used in accordance
with the manufacturer's guidelines.
Sunrise Medical,
High Street,
Wollaston,
Stourbridge,
West Midlands,
DY8 4PS,
England
tel: +44 (0)1384 446688
fax: +44 (0)1384 446699
www.SunriseMedical.com

8.0 Maintenance and Care

Maintenance
:
• Check the tyre pressure every 4 weeks. Check all of the
tyres for wear or damage.
• Check the brakes approximately every 4 weeks to make
sure that they are working properly and easy to use.
• Change tyres as you would an ordinary bicycle tyre.
• All of the joints that are critical to using your wheelchair
safely are self-locking nuts. Check every three months
to make sure that all bolts are secure (See the page on
torque). Self locking nuts should only be used once and
should be replaced after single use.
• Use only mild household cleansers when your
wheelchair is dirty. Use only soap and water when
cleaning the seat upholstery.
• If your wheelchair should ever get wet, please dry it
after use.
• A small amount of sewing-machine oil should be applied
to quick-release axles approximately every 8 weeks.
Depending on the frequen cy and type of use, we
re commend taking your wheel chair to your author ised
dealer every 6 months to have it inspected by trained
personnel.
CAUTION!
Sand and sea water (or salt in the winter) can damage
the bearings of the front and rear wheels. Clean the
wheelchair thoroughly after exposure to these conditions.
Hygiene when being reused:
When the chair is to be reused, it should be prepared
carefully, and wiped and treated with spray disinfectant
on all surfaces which could come into contact with the
user.
In doing this, you must use a liquid for alcoholic quick
disinfection for medical products and medical inventory
when you require a quick effect. Please pay attention to
the manufacturer's instructions of the disinfectant you are
using.
In general, a safe disinfectant cannot be guaranteed
on seams. We therefore recommend, that you properly
dispose of seat and back slings in the case of micro
bacterial contamination with active agents according to §
6 infection protection law.
Storage:
Please store/keep the wheelchair in a dry place.