Navi-Mixer Setup - ZENEC Z-N326 User Manual

NAVI-MIXER SETUP

In this Expert Mode menu page, you can adjust audio ducking or mute of audio and video source
playback by nav route guidance voice. Secondly, you can adjust if the route guidance voice will be
transmitted only via the left front speaker (driver side) or via both front speakers. Works only for
ZENEC navigation software.
Function Icon Operation
ON / OFF
Mute Media
OFF = Ducking of media playback during route guidance voice
Sources for
announcements
Navi Voice
ON = Media playback is fully muted during route guidance
Announcement
announcements
Driver = only at driver's speaker
Navi Voice
Front = only at speakers front left and right
Channel
Driver / Front / All (conditional)
64
TFT DISPLAY CONFIGURATION
In the TFT Setup menu you can make screen settings that control the day/night brightness of the
TFT LCD display screen. This will only work with 8GB microSD card from the ZENEC navigation
software bundle (Z-N326-SDFEU or Z-N426-SDFEU).
Function Icon Operation
TFT
Tap to adjust display configuration
configuration
Tap to select the brightness control:
TFT Navi = Day/Night brightness is controlled by the navigation
Control system.
Car = Day/Night brightness is controlled by vehicle illu voltage.
TS-Brightness Day adj range
Day 0 ~ 31
TS-Brightness Night adj range
Night 0 ~ 31
TS-Auto Tap to enable or disable TFT Auto Standby function and Auto
Standby Screen shutdown. TFT goes into standby after selected time.
NOTE
Using the DISP button you can set the display brightness to three levels
( 100% → 50% → 0% ).
65