This manual describes how to operate the device, vehicle-specific facts, and the most important basic - Press to turn on / off device. functions. In addition, the equipment variants and functions of the ZENEC system are described, as Rotary knob ...
Der Bootvorgang kann max. 1,5 Minuten in Anspruch nehmen. Dies kann zur Folge This may result in some delay until the system is ready. The ZENEC system is shut down by switching off the ignition, or removing the ignition key.
Touch to add extra amplification to the low and high output. NOTE These functions can only be used when a multifunction steering wheel is installed in the vehicle, and the ZENEC system is connected via a car specific CAN/Stalk interface.
Touch to set the muting function when parking aid is active. Audio Assist OFF / Reduced Volume / CAM Audio / MUTE Audio NOTE These functions are only supported if a rear-view camera is connected to the ZENEC system. Z-E3726...
TECHNICAL SPECIFICATIONS/APPROVAL NUMBER This is a vehicle-specific multimedia system with DVD drive, hands-free system, navigation and radio. This ZENEC system is designed for a 12 V DC vehicle electrical system. Detailed information can be obtained from the ZENEC homepage: www.zenec.com If at any time in the future you should need to dispose this product, please note that waste electrical products are not be disposed with the household waste.