Volume Setup - ZENEC Z-N326 User Manual

AUDIO SETUP: EXPERT MODE
In the Audio Setup menu page with the Expert Mode set to "ON", you can change audio relevant
settings. Such as Equalizer, Crossover, Navi-Mixer, etc. Please refer to the listings on the following
pages.
Function Icon Operation
Expert Mode Tap to enable or disable expert mode
Volume Tap to set start and source volume
Balance/Fader Tap to set fader or balance
Equalizer Tap to set the 10-BAND equalizer
X-Over Tap to make settings for the crossover
Subwoofer Tap to set subwoofer settings
Navi-Mixer Tap to set navi voice output configuration
Touch to make general quick audio settings (Loudness / Bass
Audio
Boost etc..)
Control
Can be accessed by long press of the FAV
Volume Setup: see page 56
58
AUDIO VOLUME – BASE LEVEL SETUP
In the audio menu, you can adjust the basic volume values of the various audio sources.
Function
Volume
Media Volume
TA Volume
Navi Volume
BT Call
Volume
button.
Icon Operation
Tap to set the system main startup volume
Tap to set the media playback volume
Tap to set the volume of (FM RDS) traffic announcements
Tap to set the volume of the Navi voice
Tap to set the volume of the Bluetooth handsfree volume
59