Abbreviations - ZENEC Z-N326 User Manual

GENERAL

ABBREVIATIONS

Abbreviation Description
Manufacturer-independent Bluetooth® technology allowing audio signals to be
A2DP
transmitted (Advanced Audio Distribution Profile)
AF Alternative frequency
The CAN bus (Controller Area Network) is a serial bus system for the
CAN-Bus
communication of control units in a vehicle
Transmission standard for terrestrial reception of digital radio (Digital Audio
DAB / DAB+
Broadcasting)
The digital signal processor is used for the processing of digital signals (e.g.
DSP
audio or video signals)
EQ Equalizer
Formatting format for digital media
FAT32
(File allocation table 32-bit)
Transmission standard for terrestrial reception of very high frequency analog
UKW/FM
radio (UKW)
Global navigation satellite system for position fixing
GPS
(Global Positioning System)
Global mobile radio network standard for fully digital mobile radio networks
GSM
(Global System for Mobile Communications)
ID3 tags mean meta data, which could be included together with the MP3 for-
ID3-Tag
mat.
microSD Compact flash memory
REG Regional station
SSP Secure Simple Pairing (for Bluetooth devices)
TA Traffic Announcement (RDS service)
A USB connection is a serial bus system for connecting a device to other
USB
devices (Universal Serial Bus).
76
STATUTORY RIGHTS AND WARRANTY
Dear customer,
Please read the warranty specifications below carefully.
Should your ZENEC product require warranty service, please return it to the retailer from whom
it was purchased or the distributor of your country. Do not send any product to ZENEC directly.
This ZENEC product is protected against defective materials and/or improper workmanship by a
factory warranty, for the period of two years from date of purchase at retail, to the original buyer.
For warranty work to be carried out, an RMA number must be generated, which requires a valid
product serial number and the original sales slip.
Guarantee Restrictions
This warranty does not cover any damage due to:
1. Unauthorized or unapproved installation, incorrect audio or mains connection(s).
2. Defects caused by exposure of product to humidity, water and organic fluids, prolonged
exposure to sun rays or excessive dirt or dust.
3. Mechanical defects caused by accidents, fall or impact.
4. Unauthorized repair attempts and modifications of product not explicitly authorized by the
manufacturer.
This warranty is limited to the repair or the replacement of the defective product at the manufacturer's
option and does not include any other form of damage, whether incidental, consequential or otherwise.
The warranty does not cover any transport costs or damages caused by transport or shipment of the
product. Any additional or further claims and requirements for compensation of auxiliary components
that have been damaged in sequence, directly or indirectly, are strictly excluded.
EU Legal Representative: ACR S & V GmbH ∙ Industriestraße 35 ∙ D-79787 Lauchringen ∙ Germany
ZENEC by ACR AG ∙ Bohrturmweg 1 ∙ CH-5330 Bad Zurzach ∙ Switzerland
www.zenec.com
E4 10R-05 3762
77