Setup Operations - ZENEC Z-N326 User Manual

SETUP OPERATIONS

This chapter describes all the parameter and setting functions of the ZENEC system. Please note
that settings or changed parameters can have a direct influence on the everyday use of the ZENEC
system.
Function Icon Operation
Setup Tap to access the setup mode
NOTE
Software updates applicable to this device, except navigation engine + map updates are free of
charge. Download here: www.zenec.com/support/software-updates/
50
DISPLAY ICON
With the display icon, the LCD TFT screen picture brightness can be dimmed or switched off (standby)
in two steps. This is done by tapping the icon.
Function Icon Operation
Tap to dim or brighten up TFT screen ( 100% → 50% → 0%
Disp
"standby" )
51