X-Over Setup - ZENEC Z-N326 User Manual

X-OVER SETUP

In this Expert Mode menu, you can adjust the High-pass transition frequencies of the front and rear
speakers. The factory default is OFF for front and rear speakers.
Function Icon Operation
Tap to set the high pass filter
HPF (Front)
OFF (FLAT)/65 Hz/80 Hz/100 Hz/125 Hz
Tap to set the high pass filter
HPF (Rear)
OFF (FLAT)/65 Hz/80 Hz/100 Hz/125 Hz
62
SUBWOOFER SETUP
In this Expert Mode menu, you can adjust Phase, Gain, and Low-pass transition frequencies of the
subwoofer. The default settings are Phase 0 °, Power OFF, LPF OFF.
Function Icon Operation
ONLY SUBWOOFER -Cinch Outputs (Affects the subwoofer
line-out only)
Power
ON = Volume according to setting.
OFF = Mute
Tab to set the low pass filter
LPF
OFF 160 Hz/120 Hz/100 Hz/80 Hz/65 Hz
SUBWOOFER ONLY
Phase
0/180° (inverted phase)
Touch to set the GAIN
Gain
-6 < > 6
63