Dab+ Ensemble And Station List (Only For Z-N426) - ZENEC Z-N326 User Manual

DAB+ ENSEMBLE AND STATION LIST (ONLY FOR Z-N426)

Once the first DAB+ band scan has completed, device will show all DAB+ Ensembles and radio
stations of sufficient signal strength. The Ensemble list and its content is auto updated periodically.
Function Icon Operation
Ensemble list Tap to open an Ensemble, showing the assigned DAB+ radio
selection station list
Press and hold to move the slider of the Ensemble list up and
List scrolling
down
Back Tap to jump one level back or up
A tap on each Ensemble opens the related DAB+ station list of the respective Ensemble. The station
list content follows exactly the original Ensemble display format and list sequence.
Function Icon Operation
Radio station
Tap to select one particular radio station out of the list
selection
List scrolling Press and hold to move the slider of the station list up and down
20
DAB+ SETUP (ONLY FOR Z-N426)
The setup page for the DAB+ tuner allows to define important functions such as DAB<>DAB and
FM<>DAB station following. Or to activate the phantom power supply voltage of the DAB antenna
socket.
Function Icon Operation
DAB-DAB
Tap to turn DAB-DAB station following ON or OFF
Following
FM-DAB
Tap to turn FM-DAB station following ON or OFF
Following
DAB
Tap to turn the 12V phantom power supply of the DAB
antenna socket
antenna socket on the device backside ON or OFF
phantom power
NOTE
The FM-DAB Following function works with a static function algorithm. This may or may not
deliver good switching results, depending on the broadcast region.
21