Table of Contents
Advertisement
Print
Click to print the selected items on the machine. You cannot print the data until it is uploaded to the
machine. Click Apply to upload the new data to the machine, and then click Print.
OK
Click to start uploading data to the machine, and then exit the Remote Setup Program. If an error message
appears, enter the correct data again, and then click OK.
Cancel
Click to exit the Remote Setup Program without uploading data to the machine.
Apply
Click to upload data to the machine without exiting the Remote Setup Program.
5. When finished, click OK.
Related Information
•
ControlCenter2 (Macintosh)
•
Remote Setup (Macintosh)
740
Advertisement
Table of Contents
