Table of Contents
Advertisement
Routers or access points that support WPS are marked with this symbol:
1. Press
[Settings] > [All Settings] > [Network] > [WLAN] > [WPS w/ PIN Code].
If your machine displays the [All Settings] menu on the Home screen, skip the [Settings] menu.
2. When [Enable WLAN?] appears, press [Yes].
This will start the wireless setup wizard. To cancel, press [No].
3. The LCD displays an eight-digit PIN and the machine starts searching for a wireless LAN access point/router.
4. Using a computer connected to the network, in your browser's address bar, type the IP address of the device
you are using as the Registrar. (For example: http://192.168.1.2)
5. Go to the WPS settings page and type the PIN, and then follow the on-screen instructions.
•
The Registrar is usually the wireless LAN access point/router.
•
The settings page will differ depending on the brand of wireless LAN access point/router. For more
information, see the instructions supplied with your wireless LAN access point/router.
If you are using a Windows
following steps:
6. Do one of the following:
®
•
Windows
7
Click
(Start) > Devices and Printers > Add a device.
®
•
Windows
8
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings >
Control Panel > Hardware and Sound > Devices and Printers > Add a device.
2
®
®
7, Windows
8, or Windows
®
10 computer as a Registrar, complete the
320
Advertisement
Table of Contents
