Brother DCP-L8410CDW Online User's Manual page 689

Level 3
WLAN
Wi-Fi Direct
Level 4 Level 5
TCP/IP DNS Server
APIPA
IPv6
Setup Wizard -
WLAN -
Assistant
WPS -
WPS w/ PIN -
Code
WLAN Status Status
Signal
SSID
Comm. Mode
MAC Address -
Set to
-
Default
WLAN Enable -
Push Button -
PIN Code -
Manual -
Group Owner -
Device Device Name
Information
SSID
IP Address
Status Status
Information
Level 6 Descriptions
Secondary Specify the IP address of the
secondary DNS server.
- Set the machine to allocate the IP
address from the link-local address
range automatically.
- Turn the IPv6 protocol on or off. To
use the IPv6 protocol, go to the
Brother Solutions Center at
support.brother.com
information.
- Configure the wireless network
settings using the setup wizard.
- Configure your wireless network
settings using the Brother
installation disc.
- Configure your wireless network
settings using the one-button push
method.
- Configure your wireless network
settings using WPS with a PIN.
- View the current wireless network
status.
- View the current wireless network
signal strength.
- View the current SSID.
- View the current Communication
Mode.
- View the machine's MAC address.
- Restore the wireless network
settings to the factory settings.
- Turns the wireless interface on or
off.
- Configure your Wi-Fi Direct
network settings using the one-
button push method.
- Configure your Wi-Fi Direct
network settings using WPS with a
PIN code.
- Configure your Wi-Fi Direct
network settings manually.
- Set your machine as the Group
Owner.
- View your machine's device name.
- View the Group Owner's SSID.
When the machine is not
connected, the LCD displays Not
Connected.
- View your machine's current IP
Address.
- View the current Wi-Fi Direct
network status.
for more
682