Brother DCP-L8410CDW Online User's Manual page 696

Level 1 Level 2
2-sided
Auto Continue -
Output Colour -
HP Tray Command -
Reset Printer -
Colour Calibration
Correction
Registration
Auto Correction -
Colour Settings Setting Mode
[All Settings] > [Network]
Level 1 Level 2
Wired LAN TCP/IP
Level 3 Descriptions
select 1-sided Feed for letterhead or preprinted
paper, the last page will be printed on the reverse
side.
- Select if you want the machine to clear paper size
errors or media type errors automatically, and use
paper from other trays.
- Set the output colour.
- Select the correct version of HP LaserJet tray
emulation.
- Restore the printer settings to the factory settings.
Calibrate Initiate colour calibration to check and correct
colours.
Reset Reset the calibration parameters to the default
settings.
- Align the print position of each colour.
Set the machine to perform Colour Calibration and
Registration automatically.
Select whether to apply the colour print settings of
the machine or the printer driver.
Colour Mode Select the colour mode.
Improve Grey Turn on or off to improve the image quality of
Colour shaded areas.
Enhance Black
Turn on or off if a black graphic does not print
Printing correctly.
Brightness Adjust the brightness.
Contrast Adjust the contrast.
Red Adjust the red colour.
Green Adjust the green colour.
Blue Adjust the blue colour.
Level 3 Level 4
BOOT Method IP Boot
Tries
IP Address
-
Subnet Mask -
Gateway -
Node Name -
WINS -
Configuration
WINS Server Primary
Secondary
DNS Server Primary
Descriptions
Select the BOOT method that best
suits your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
(up to 32 characters)
Select the WINS configuration mode.
Specify the IP address of the primary
WINS server.
Specify the IP address of the
secondary WINS server.
Specify the IP address of the primary
DNS server.
689