Table of Contents
Advertisement
•
BK: Black
•
C: Cyan
•
M: Magenta
•
Y: Yellow
11. Hold the drum unit frame with both hands, place your left thumb on the drum unit gear, and roll the drum
toward you by hand while looking at the surface of the suspected area.
To avoid print quality problems, DO NOT touch the surface of the drum unit except the edge.
12. Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off.
NOTE
DO NOT clean the surface of the photosensitive drum with a sharp object or any liquids.
13. Turn the drum unit over by holding the green handles.
14. Reinsert the toner cartridge into the new drum unit and gently pull it toward you until you hear it lock into
place. Make sure that you match the toner cartridge colour to the same colour label on the drum unit. Repeat
this for all toner cartridges.
•
BK: Black
BK
C
M
Y
639
Advertisement
Table of Contents
