Table of Contents
Advertisement
Error Message
No Tray T1
No Tray T2
No Tray T3
No Tray T4
No Waste Toner
Out of Fax Memory
Out of Memory
Paper Low
Paper Low T1
Paper Low T2
Paper Low T3
Paper Low T4
Print Data Full
Print Unable ##
Registration
Cause
The paper tray is not installed
or not installed correctly.
The waste toner box is not
installed or not installed
correctly.
The machine's fax memory is
full.
The machine's memory is full.
The paper tray is nearly empty.
The machine's memory is full.
The machine has a mechanical
problem.
Registration failed.
Action
Reinstall the paper tray indicated on the LCD.
Reinstall the waste toner box.
If you are using Fax Preview function, delete
unwanted received fax data.
If you are using Memory Receive function and are
not using fax preview function, print received fax
data.
See Related Information: Print a Fax Stored in the
Machine's Memory.
If a fax-sending or copy operation is in
process
Do one of the following:
•
Press Send Now to send the pages scanned
so far.
•
Press Partial Print to copy the pages
scanned so far.
•
Press Quit or
and wait until the other
operations that are in progress finish, and then
try again.
If a scan operation is in process
•
Split the document into multiple parts.
•
Reduce the Resolution.
•
Reduce the File Size.
•
Select the high compression PDF file type.
•
Clear faxes from the memory.
If a print operation is in process
Press
and reduce the print resolution.
Refill the paper in the paper tray indicated on the
LCD.
Press
and delete the previously stored
secure print data.
•
Press and hold
to turn the machine off,
wait a few minutes, and then turn it on again.
•
If the problem continues, contact Brother
customer service.
•
Press and hold down
off. Wait a few seconds, and then turn it on
again. Perform the colour registration again
using the LCD.
•
Install a new belt unit.
•
If the problem continues, contact Brother
customer service or your local Brother dealer.
to turn the machine
556
Advertisement
Table of Contents
