Table of Contents
Advertisement
Error Messages
No Device
Server Timeout,
contact your
administrator.
Server Timeout
Wrong Date&Time,
contact your
administrator.
Internal Error
Related Information
•
Network Problems
Cause
When configuring the Wi-Fi
Direct network, the Brother
machine cannot find your
mobile device.
The Brother machine cannot
connect to the server for the
Store Print Log to Network
feature.
The Brother machine cannot
connect to the LDAP server.
The Brother machine cannot
connect to the Active
®
Directory
server.
The Brother machine does not
obtain the time from the SNTP
time server or you have not
configured the Date&Time for
the machine.
The Brother machine's LDAP
protocol is disabled.
The Brother machine's CIFS
protocol is disabled.
Action
•
Make sure your machine and mobile device are in the
Wi-Fi Direct mode.
•
Move the mobile device closer to your Brother
machine.
•
Move your Brother machine and the mobile device to
an obstruction-free area.
•
If you are manually configuring the Wi-Fi Direct
network, make sure you have entered the correct
password.
•
If your mobile device has a configuration page for how
to obtain an IP address, make sure the IP address of
your mobile device has been configured via DHCP.
•
Make sure your server address is correct.
•
Make sure your server is connected to the network.
•
Make sure the machine is connected to the network.
•
Make sure your server address is correct.
•
Make sure your server is connected to the network.
•
Make sure the machine is connected to the network.
•
Make sure your server address is correct.
•
Make sure your server is connected to the network.
•
Make sure the machine is connected to the network.
•
Make sure the settings to access the SNTP time server
are configured correctly in Web Based Management.
•
Confirm the Date&Time settings of your machine are
correct in Web Based Management.
Confirm your authentication method, and then enable the
necessary protocol setting in the Web Based
Management.
596
Advertisement
Table of Contents
