Table of Contents
Advertisement
Home >
Network
>
Technical Information for Advanced Users
Only)
> Configure the Gigabit Ethernet Settings Using Web Based Management
Configure the Gigabit Ethernet Settings Using Web Based Management
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
3. No password is required by default. Type a password if you have set one, and then click
4. Click the Network tab.
5. Click Wired.
6. Click Ethernet in the left navigation bar.
7. Select Auto from the Ethernet Mode drop-down list.
8. Click Submit.
9. To enable the settings, restart your machine.
You can confirm your settings by printing the Network Configuration Report.
Related Information
•
Gigabit Ethernet (Wired Network Only)
•
Print the Network Configuration Report
>
Gigabit Ethernet (Wired Network
.
379
Advertisement
Table of Contents
