Accessories; Optional Beam-Shaper - GLP IMPRESSION X4L Instruction Manual

5 Accessories

5.1 Optional Beam-Shaper:

The
I M P R E S S I O N X 4
I M P R E S S I O N X 4
Please contact your local GLP dealer for further information about this accessory
part.
To install the beam-shaper lens please locate the little cutout (see 1 below) and twist
the lens carefully until the latch (see 2 below) locks in.
To remove the lens again simply pull the latch and twist the beam-shaper lens until
you can lift it out of the fixture.
impression X4 L manual (v0.2)
can be equipped with an optional beam-shaper.
L
L
GLP  German Light Products GmbH
from software version: v0.xx
28