Operating On The Floor (Upright) - GLP IMPRESSION X4L Instruction Manual

Base plate view:
2 x M10
length max.16mm

2.2.1 Operating on the Floor (upright)

To operate the
dedicated tri-legged floor stand supplied with your fixture. It is fixed to the base of
the fixture with fasteners called Camlock quick-release connectors. Insert the two
fasteners and turn each 90° to lock them. Do the opposite to release them again.
On both sides you'll find eyelets to pull though a fixing strap. This allows for
additional bracing of the fixture.
impression X4 L manual (v0.2)
I M P R E S S I O N X 4 L in an upright position, please use the
I M P R E S S I O N X 4 L
GLP  German Light Products GmbH
from software version: v0.xx
4 x Camlock
quick release
fasteners
7