Work Of Service; User Maintenance; Maintenance And Inspection; Periodical Servicing - Canon J1 Service Manual

2
Technology > Work of Service > Upgrading

Work of Service

User Maintenance

No. Model Item
1 Finisher Unit Staple cartridge
replacement
2 Saddle Stitcher Unit Staple cartridge
replacement

Maintenance and Inspection

■ Periodical Servicing

• Does not have parts that must be serviced on a periodical basis.

■ Periodically Replaced Parts

• The Finisher unit does not have parts that must be replaced on a periodical basis.

■ Durables

• The following parts are reaching the expected service life, perform the parts replacement if
needed.
● Finisher Unit
No. Name No. Quantity Approx.
1 Stapler FM2-0665 1
2 Delivery static charge FC5-3667 1
eliminator (L)
3 Delivery static charge FC5-5571 1
eliminator (R)
4 Inlet static charge FL2-0822 1
eliminator
5 Swing guide inside 4F3-0929 1
static charge
eliminator
6 Buffer roller FC5-3442 2
7 Return roller (Front) FC0-4739 1
8 Return roller (Rear) FC0-4740 1
2
Technology > Work of Service > Upgrading
Timing
At the time of about
5,000 times operation
At the time of about
2,000 times operation
T-2-12
Remark Refer to
life
500,000 1 cartridge lasts (Refer to page
times approximately 4-31)
5,000 times
1,000,000 (Refer to page
sheets 4-33)
1,000,000 (Refer to page
sheets 4-33)
1,000,000 (Refer to page
sheets 4-34)
1,000,000 (Refer to page
sheets 4-33)
1,000,000 (Refer to page
sheets 4-32)
1,000,000 Color;Black(Front) (Refer to page
sheets 4-32)
1,000,000 Color;Gray(Rear) (Refer to page
sheets 4-32)
T-2-13
● Saddle Stitcher Unit
No. Name No. Quantity
1 Stitcher FL2-0846-000

Measures at Time of Parts Replacement

Part name
Finisher 1) Before replacing the finisher controller PCB, output the service mode
controller PCB setting values by P-PRINT.
(LV1.COPIER> FUNCTION> MISC-P>P-PRINT)
2) After replacing the finisher controller PCB,enter the following item.
However, in this case, the counter cannot enter.

Upgrading

Upgrade the firmware of the finisher controller according to the upgrade procedure described
in the service manual of the host machine.
This finisher does not support upgrading via downloader PCB (FY9-2034).
Approx. Remark Refer to
life
2 100,000 1 cartridge lasts (Refer to page
times approximately 4-35)
2,000 times
Operation Refer to
(Refer
to page
4-36)
2-40
T-2-14
T-2-15
2-40