Canon J1 Service Manual page 111

5
Adjustment > Basic Adjustment > Adjusting the Bias Line of Saddle Delivery Paper > Adjustment
Calling the folded stack "B-fold" when L1<L2. (B-fold)
L
1
L
2
F-5-20
● Adjustment
1) Turn power of the host machine OFF.
2) Disconnect the finisher from the host machine.
3) Remove 7 screws [1] to remove the PCB cover.
[2]
[1]
F-5-21
5
Adjustment > Basic Adjustment > Adjusting the Bias Line of Saddle Delivery Paper > Adjustment
4) Loosen 2 screws retaining the paper positioning plate unit. Access the screw [1] from under
the support member [2].
NOTE:
Do not remove the screws, but just loosen them.
[1]
[2]
[1]
[2]
5-13
[1]
F-5-22 F-5-23
5-13